Automatic PLC Control Curving Former Machine Color Steel Roofing Sheets Hydraulic Arch Camber Curving Roll Forming Machine

Basic Info

Model NO.	HX Curving Roll Forming Machine
After-sales Service	Door to Door
Warranty	1 Year
Tile Type	Colored Steel
Condition	New
Customized	Customized
Usage	Roof
Transmission Method	Machinery

Product Description

Basic Info.

Applicable Industries	Manufacturing Plant, Construction Works	Main Frame	350mm H steel
Width of the raw material	1000mm,1200mm,1220mm,1450mmor as Your Needs	Middle plate	16mm
Thickness	0.3-0.8mm	Wheel	45# steel
Dimensions (LWH)	210016001200mm	Chain	1 inch
Total power	4kw	Voltage	380V 50HZ 3PH (or as Your Requested)
Rows of rollers	3 rows	Weight	3.0T
Productivity	5m/min (or as Your Requested)	Material of Wheel	Ball Bearing Steel
Diameter of shaft	¢75mm	Color	as Your Request

Customized service is available!!!

Product Description

HX Curving Roll Forming Machine

Processing flow diagram of machine:
Decoiler→ Feeding →Roll forming →Measure length →Hydraulic cutting →Output table Packaging & deliveryPackaging DetailsImportant Components Wiped with Anti Rust Oil, Rollers and Shafters covered by foam film,Hydraulic station PLC control Box Spare parts and some small parts packed in plywood box,All Components Fixed by steel wire in Container.Port:tianjin port
Lead time:

Quantity(sets)	1 - 1	>1
Lead time (days)	45	To be negotiated

Product Picture Description

Manual Uncoiler
It is used to support the steel coil and realize the uncoiling by means of rotatory movement. The steel coil is uncoiled manually. The capacity of this uncoiler is 5 Ton, and it is capable for most of the cases. This equipment is suitable to process the steel coils with 508mm of ID.

Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Power:4kw
Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC:delta
Cutting system
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12 with quenching treatment

Our service1. Our machine warranty is 1 years (non-man-made damage, accessories, technical support)2. Technical guide is provided during whole life of the machine.3. Oversea services will be provided but any cost thus incurred will be paid by the buyers.4. We support customers inspect our factory or machines by video call.5.After customer inspect the factory,if need translator service,we also can supply this service for free(English).6.Customer LOGO,Tel, can customize on our machines.7.Voltage can customize according to customer's requirement.8.If need raw material,we can supply the good suppliers for steel coil, aluminum coil,steel strip and so on.9.If need more machine pictures or videos,please contact us soon.10.we just can supply the sample produced by our machine; it is not machine sample, please get to know this.About Us

Automatic PLC Control Curving Former Machine Color Steel Roofing Sheets Hydraulic Arch Camber Curving Roll Forming Machine

Products

Automatic PLC Control Curving Former Machine Color Steel Roofing Sheets Hydraulic Arch Camber Curving Roll Forming Machine

Basic Info

Product Description